Raymarine forum

I updated my E127 to the latest software and it will not boot. It goes into a cycle of giving the Raymarine screen then flashes the home screen top ribbon only and then restarts etc. I have reinstalled the update twice with no improvement.

Please advise

Welcome to the Raymarine Forum epc7405,

Should power to the MFD be interrupted, then the reported issue may occur. It is recommended that you try to reset the MFD to correct the problem. Should this not correct the problem, then the MFD will need to be sent to Raymarine’s Product Repair Center to be serviced.

http://www.raymarine.com/knowledgebase/i...?view=3806

Per epc7405: "please disregard the prior post I downloaded the updated again and reinstalled with no problems. I must have had a corrupted card. The A9 however had to be reset to factory before I could get it to boot properly."