12-01-19, 12:14 PM
Hello,
After a couple of clutch failures I measured voltages throughout the system. There is not the correct voltage present at the clutch terminals on the ACU (voltage drop of 1,5V between course computer power supply and clutch terminals). The FAQ says in that case then the course computer is faulty and needs to be serviced.
See attached picture
1) Has anyone encountered this problem and was able to resolve it?
2) What kind of servicing is required?
3) What parts do I need?
Best!
Laurens
After a couple of clutch failures I measured voltages throughout the system. There is not the correct voltage present at the clutch terminals on the ACU (voltage drop of 1,5V between course computer power supply and clutch terminals). The FAQ says in that case then the course computer is faulty and needs to be serviced.
See attached picture
1) Has anyone encountered this problem and was able to resolve it?
2) What kind of servicing is required?
3) What parts do I need?
Best!
Laurens