Raymarine forum

Full Version: [LW11] Raymarine E70010 ITC-5 Instrument Transducer Converter
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Will the Raymarine E70010 ITC-5 Instrument Transducer Converter work for other manufacturer's analog wind instruments, specifically Data Marine Wind Machine?
Dear NS30paul,

The iTC-5 will only work with Raymarine transducers. Your third party wind transducer will not work with the iTC-5. Do you have the instrument still? Can you output the data over NMEA to share wind data on the network?

Many Thanks
Louise
I still have the Data Marine wind machine (Corinthian) and it is functional. I don’t believe it has digital output to directly feed into nmea. I would like to have wind speed and direction fed to my Axiom 9.
Is there a way or is thee a masthead unit that I can buy without the display module?
Dear NS30Paul,
Dear NS30Paul,

Thank you for your response.

The iTC-5 will work with either one of our short or long arm wind vane without the requirement of an instrument display and the transducer directly connected to the iTC-5.

The part numbers are as follows;
Short arm vane transducer with 30m cable E22078
Long arm wind vane transducer with 50m cable E22079

Many Thanks
Louise
Reference URL's