01-14-20, 12:18 AM
Hi Check,
My apologies for the confusion.
New boat had ST60 wind and ST4000 Autohelm (connected to compass device).
I have I60 wind (and transducer) I50 depth and I50 speed (and impeller) from old boat.
I am attempting to integrate my "I" instruments with "ST" instruments and add the Element and integrating everything, including fish finder capabilities, as much as reasonably possible.
I have attached an updated diagram based on your suggestions....
1. I have replaced ST60 wind with I60 wind
2. I have added power supply so power now runs to 5 way connector in addition to the Element
3. I have added Actisense converter to interface with ST4000 Autohelm with 5 way connector
4. I have added terminator plugs at either end of the 5 way connectors
Provided that this latest diagram checks out my only remaining question (famous last words) is will the original wind vane / transducer that comes with the original ST60 wind instrument work with the newer I60 wind instrument. I have the vane / transducer for I60 but may not be able to get up the mast to replace just yet. I am hoping the original cable will work.
Hopefully I can leave you in peace after this thanks so much for all your help!
Regards,
Andrew
My apologies for the confusion.
New boat had ST60 wind and ST4000 Autohelm (connected to compass device).
I have I60 wind (and transducer) I50 depth and I50 speed (and impeller) from old boat.
I am attempting to integrate my "I" instruments with "ST" instruments and add the Element and integrating everything, including fish finder capabilities, as much as reasonably possible.
I have attached an updated diagram based on your suggestions....
1. I have replaced ST60 wind with I60 wind
2. I have added power supply so power now runs to 5 way connector in addition to the Element
3. I have added Actisense converter to interface with ST4000 Autohelm with 5 way connector
4. I have added terminator plugs at either end of the 5 way connectors
Provided that this latest diagram checks out my only remaining question (famous last words) is will the original wind vane / transducer that comes with the original ST60 wind instrument work with the newer I60 wind instrument. I have the vane / transducer for I60 but may not be able to get up the mast to replace just yet. I am hoping the original cable will work.
Hopefully I can leave you in peace after this thanks so much for all your help!
Regards,
Andrew