01-13-20, 08:08 PM
We have a Furuno FCV-295 with Airmar R109C-LH transducer. Also have an Axiom 12. Is there any possibility to split the transducer signal for both the Furuno and Axiom?
01-13-20, 08:08 PM
01-14-20, 10:31 PM
Hello XandeGuedes,
No, don't try to do this. It won't work and you will destroy the sounders by each putting something over 1000Vp-p into the other's receiver when it transmits.
If there were an industry-standard language for sharing sounder data (analogous to NMEA2000 but for high-bandwidth graphical data) then that might allow the sharing of the sounder image, but at this stage there is no such protocol.
Regards,
Tom
No, don't try to do this. It won't work and you will destroy the sounders by each putting something over 1000Vp-p into the other's receiver when it transmits.
If there were an industry-standard language for sharing sounder data (analogous to NMEA2000 but for high-bandwidth graphical data) then that might allow the sharing of the sounder image, but at this stage there is no such protocol.
Regards,
Tom