01-23-20, 11:47 AM
My AxiomPro and a78 will not resolve data master. The a78 will not read the AxiomPro as data master. Is there a way to force the a78 to be the "slave" of the AxiomPro so I can share display information from the AxiomPro 12 RVX?
01-23-20, 11:47 AM
01-23-20, 01:57 PM
Welcome to the Raymarine Forum Greyharbor,
Please click here to view a FAQ addressing this subject. As indicated therein, a-Series MFDs (a member of the legacy a/c/e-Series MFD family) cannot be interfaced via Ethernet communications to a MFD running LightHouse 3 software (i.e. Axiom/Axiom Pro/Axiom XL MFDs). As indicated therein the a-Series MFD may alternatively be interfaced to the same backbone as is the Axiom Pro MFD ... however, data sharing will be limited to that specified within the referenced FAQ.
Please click here to view a FAQ addressing this subject. As indicated therein, a-Series MFDs (a member of the legacy a/c/e-Series MFD family) cannot be interfaced via Ethernet communications to a MFD running LightHouse 3 software (i.e. Axiom/Axiom Pro/Axiom XL MFDs). As indicated therein the a-Series MFD may alternatively be interfaced to the same backbone as is the Axiom Pro MFD ... however, data sharing will be limited to that specified within the referenced FAQ.