Raymarine forum
Raymarine forum
>
Raymarine Forums
>
Networking / System Integration
> [CA11] Seatalk backbone power
Full Version:
[CA11] Seatalk backbone power
You're currently viewing a stripped down version of our content.
View the full version
with proper formatting.
wagneryuma
01-28-20, 10:50 AM
I am going to add more electronics to my boat and I remember reading that the backbone only needs to be powered one time. There will be 3 of the 5 way connectors with backbone cables joining them. Is what I remember correct?
Chuck - Raymarine - Moderator
01-28-20, 02:12 PM
Welcome to the Raymarine Forum wagneryuma,
As indicated within the FAQ found
here
, the marine electronics system's
powered and properly terminated SeaTalkng / NMEA 2000 backbone
should be powered from a single spur socket located at the approximate midpoint of the backbone's LEN load.
Raymarine forum
>
Raymarine Forums
>
Networking / System Integration
> [CA11] Seatalk backbone power
Reference URL's
Raymarine forum:
http://forum.raymarine.com/index.php
: