02-03-20, 10:57 PM
Hi All,
I'm tackling the task of replacing all of my electronics on my 33 foot sailing boat with new and have purchased the following:
- Raymarine I70 wind, depth & Speed pack (including Raymarine ITC-5)
- Additional Raymarine I70 display
- Raymarine C97 MFD
- Raymarine autohelm EV100 with P70S control head
I am struggling on how i am best to cable/network for the installation, in particular i am looking for advice on the following items:
1) How should power be run to the backbone? Can this be done directly to the ITC-5 to then reticulate via the backbone?
2) If the backbone is powered, can power simply be provided to the C97 MFD via a spur cable? I understand that it will not give me all functions but i only want to use it as a chart plotter.
3) I plan on mounting the C97 MFD in a Navpod at the helm and passing the cable down through the stainless rail at the helm, to do the least damage and make it as simple as possible i plan on using a stripped end spur cable. Is this recommended or is there a better way?
4) Is there an advantage of connecting the autohelm into the network? It is currently standalone but is old ST40 gear. What are the benefits?
I have put together a schematic of how i think the system should be put together and welcome advice prior to purchasing the additional cables/connectors required to complete the installation.
Cheers
I'm tackling the task of replacing all of my electronics on my 33 foot sailing boat with new and have purchased the following:
- Raymarine I70 wind, depth & Speed pack (including Raymarine ITC-5)
- Additional Raymarine I70 display
- Raymarine C97 MFD
- Raymarine autohelm EV100 with P70S control head
I am struggling on how i am best to cable/network for the installation, in particular i am looking for advice on the following items:
1) How should power be run to the backbone? Can this be done directly to the ITC-5 to then reticulate via the backbone?
2) If the backbone is powered, can power simply be provided to the C97 MFD via a spur cable? I understand that it will not give me all functions but i only want to use it as a chart plotter.
3) I plan on mounting the C97 MFD in a Navpod at the helm and passing the cable down through the stainless rail at the helm, to do the least damage and make it as simple as possible i plan on using a stripped end spur cable. Is this recommended or is there a better way?
4) Is there an advantage of connecting the autohelm into the network? It is currently standalone but is old ST40 gear. What are the benefits?
I have put together a schematic of how i think the system should be put together and welcome advice prior to purchasing the additional cables/connectors required to complete the installation.
Cheers