Raymarine forum

I have tried numerous times to update to the latest fw 040200.02.02.00, but all these attempts failed on Win10. Drivers completely removed with several reboots, 2 cables usb used, but no luck.

Any ideas?

04 Feb 2020 - 16:19:29.105 : Welcome screen
04 Feb 2020 - 16:19:32.355 : Start
04 Feb 2020 - 16:23:21.077 : Disconnect
04 Feb 2020 - 16:23:24.624 : Boot driver install
04 Feb 2020 - 16:23:28.967 : Boot driver install - successful
04 Feb 2020 - 16:23:37.795 : Boot driver installed
04 Feb 2020 - 16:23:43.764 : AIS driver install
04 Feb 2020 - 16:23:47.982 : AIS driver install - successful
04 Feb 2020 - 16:25:13.961 : Connect
04 Feb 2020 - 16:25:26.719 : Detecting AIS
04 Feb 2020 - 16:25:26.735 : Application port name: COM5
04 Feb 2020 - 16:25:26.735 : Command: $PSMT,0,0,0,2,appver,0*28
04 Feb 2020 - 16:25:26.735 : Response: 040200.01.15.01
04 Feb 2020 - 16:25:26.735 : Detecting AIS - found
04 Feb 2020 - 16:25:26.735 : 040200.01.15.01
04 Feb 2020 - 16:25:26.735 : 040200.02.02.00
04 Feb 2020 - 16:25:26.735 : Detecting AIS - update required
04 Feb 2020 - 16:26:14.310 : Booting
04 Feb 2020 - 16:26:14.326 : Boot command: $PSMT,0,3,0x2C75B2FA,0,bootcmd 0xB00D0001,0*46
04 Feb 2020 - 16:26:14.326 : Connecting
04 Feb 2020 - 16:26:21.416 : Bootloader port name: COM6
04 Feb 2020 - 16:26:21.421 : Rx: U
04 Feb 2020 - 16:26:21.421 : Tx: U
04 Feb 2020 - 16:26:21.421 : Rx: U
04 Feb 2020 - 16:26:21.421 : Rx: U
04 Feb 2020 - 16:26:21.421 : Rx: U
04 Feb 2020 - 16:26:21.421 : Rx: U
04 Feb 2020 - 16:26:21.421 : Rx: U
04 Feb 2020 - 16:26:21.421 : Rx: U
04 Feb 2020 - 16:26:21.421 : Rx: U
04 Feb 2020 - 16:26:21.421 : Rx: U
04 Feb 2020 - 16:26:21.421 : Rx: U
04 Feb 2020 - 16:26:21.421 : Rx: U
04 Feb 2020 - 16:26:21.421 : Rx: U
04 Feb 2020 - 16:26:21.421 : Rx: U
04 Feb 2020 - 16:26:21.421 : Rx: U
04 Feb 2020 - 16:26:21.634 : Rx: C
04 Feb 2020 - 16:26:21.639 : Connecting - connected
04 Feb 2020 - 16:26:21.694 : Updating
04 Feb 2020 - 16:26:25.012 : Updating - timeout

Dear wep,

Thank you for your post.

I recommend updating the AIS650 via an sd card. This is a simpler method, you can download the software from the website and follow the instructions to populate the sd card.

This is available here.

Many Thanks
Louise

Thanks, Louise. I do not have SD card on hands.

It seems v2.02 update has nothing important. Since June 2017 no new futures were released and minor improvements simply do not worth the hassle.

- Preparation for the release of new features.
- Several minor improvements have also been implemented to enhance performance.

You are welcome.