04-28-20, 09:42 PM
I have a 1958 wooden yacht. What in hull transducer would work with my Axiom 12 MFD? The sight says they are not recommended??
Thanks
Thanks
04-28-20, 09:42 PM
04-29-20, 01:44 AM
Hello danacaicos,
That's correct, in-hull transducers (sitting in a wet-box/tank inside the hull) will not work in a wooden hull, the timber absorbs too much of the sound energy for reliable operation. In-hull transducers are only suitable for single-skin fibreglass hulls.
For a timber hull you need a bronze through-hull transducer (plastic transducers also aren't suitable in wood because when the timber swells it will crack the transducer.)
There are a range of bronze through-hulls available with different capabilities that are compatible with Axiom 12 RV displays:
The simplest and cheapest option are the CPT-S tilted element depth-only transducers, e.g. part A80446, with adaptor A80490.
Regards,
Tom
That's correct, in-hull transducers (sitting in a wet-box/tank inside the hull) will not work in a wooden hull, the timber absorbs too much of the sound energy for reliable operation. In-hull transducers are only suitable for single-skin fibreglass hulls.
For a timber hull you need a bronze through-hull transducer (plastic transducers also aren't suitable in wood because when the timber swells it will crack the transducer.)
There are a range of bronze through-hulls available with different capabilities that are compatible with Axiom 12 RV displays:
- CPT-S bronze tilted-element low-profile Chirp fishfinder/depth transducers or CPT-120 bronze faired Chirp fishfinder/depth + DownVision transducer part A80350, connect via an A80490 adaptor cable
- various bronze CP370-compatible depth-only or depth-speed temperature transducers, connect via A80489 adaptor
- Bronze RV200, RV212 or RV220 single or split-pair RealVision 3D imaging transducers, no adaptor cable required.
The simplest and cheapest option are the CPT-S tilted element depth-only transducers, e.g. part A80446, with adaptor A80490.
Regards,
Tom