05-05-20, 10:45 AM
Good day.
I have purchased a boat with a relatively low operation time and (unbeknownst to me) non functioning autopilot system. The entire setup consists of an Es75 MFD, ACU-400, EV-1 and P70s. I have connected a P70s control head directly to the ACU and it is powered (by ACU) but still throws up the same error. I have tested the drive (hydraulic) motor and clutch directly against a 12v source, both are functioning correctly. ACU has Yellow LED on power and red on Seatalk status. Could it be due to bad software compatibility or is the ACU bad?
Software versions;
Es75 MFD: 19.03-00036
EV-1 course computer: 2.18
P70s control head: 3.07
Appreciate any help!
I have purchased a boat with a relatively low operation time and (unbeknownst to me) non functioning autopilot system. The entire setup consists of an Es75 MFD, ACU-400, EV-1 and P70s. I have connected a P70s control head directly to the ACU and it is powered (by ACU) but still throws up the same error. I have tested the drive (hydraulic) motor and clutch directly against a 12v source, both are functioning correctly. ACU has Yellow LED on power and red on Seatalk status. Could it be due to bad software compatibility or is the ACU bad?
Software versions;
Es75 MFD: 19.03-00036
EV-1 course computer: 2.18
P70s control head: 3.07
Appreciate any help!