06-11-16, 07:43 PM
I noticed that I get an intermittent screen jump after i upgraded to the V17.45 This moves my boat to the top of the screen from the bottom with both my units. I have an E-95 in the main cabin and an E-125 at the helm They are both 2014 touch screen units. The only units I did not upgrade were my two P-70's at the twin helms. I had no issues before the upgrade. These screen jumps are occurring while I am at the dock. I have not yet sailed the boat.
The upgrade went flawlessly. I used the micro SD cards in Fat format as per instructions. To double check I again reinstalled the software and it again went fine leaving only the P-70's to be upgraded later.
All of my systems are working perfectly. All the components in my software are working. AIS, Radar, route plotting. I reconfigured my preferences as i elected to redo them manually.
The upgrade went flawlessly. I used the micro SD cards in Fat format as per instructions. To double check I again reinstalled the software and it again went fine leaving only the P-70's to be upgraded later.
All of my systems are working perfectly. All the components in my software are working. AIS, Radar, route plotting. I reconfigured my preferences as i elected to redo them manually.