05-06-20, 02:15 AM
I tried to upgrade the software on my Axiom 9 ( E70366R ) from v3.10.42 to the latast v3.11.42.
First attempt "online" failed downloading just before 98%.
Second attempt "online" I got a message similar to "will used SD1 delete file after" downloaded OK, and got started the installation it will take 4 minutes.
When i looked efter a while the installation failed
Than i decided to download the files "https://www.raymarine.eu/service-and-support/software-updates/mfds/lighthouse3/axiom-models.html"
Installed the SD-card and power on the Axiom , it detected the new software on the SD-card and asked if I wanted to install the new software i pressed Yes got the message "it will take 4 minutes"
when i looked the Axiom have rebooted but it fail to boot get the "Raymarine" logo and Axiom Logo and there it loops :-(
See the Mov file http://rickardt.net/omega/IMG_0775.MOV
How to resolve this ? is the a way to reload the reset the Axion via the USB port.?
hans@rickardt.net
First attempt "online" failed downloading just before 98%.
Second attempt "online" I got a message similar to "will used SD1 delete file after" downloaded OK, and got started the installation it will take 4 minutes.
When i looked efter a while the installation failed
Than i decided to download the files "https://www.raymarine.eu/service-and-support/software-updates/mfds/lighthouse3/axiom-models.html"
Installed the SD-card and power on the Axiom , it detected the new software on the SD-card and asked if I wanted to install the new software i pressed Yes got the message "it will take 4 minutes"
when i looked the Axiom have rebooted but it fail to boot get the "Raymarine" logo and Axiom Logo and there it loops :-(
See the Mov file http://rickardt.net/omega/IMG_0775.MOV
How to resolve this ? is the a way to reload the reset the Axion via the USB port.?
hans@rickardt.net