I'm having an issue with an Axiom 9 shutting down when trying to open the waypoint list or waypoint details page. After the first time I experienced this I did a power off reset and manually configured the settings again and issue still came back. It does not do it all the time but fairly often. I am running the latest software version and I have checked all the network connections and they are all good. Also the system voltage was at 13.5 volts the last time this was happening. I have attached the crash logs and a diagram of my network.
Thanks for your assistance.
Hello RockBottom,
Could you please confirm which version of software the display is running?
Chris,
Hi Rockbottom,
When you are reloading the waypoint data are they from a previous software version? I have not been able to duplicate this on our equipment.
Chris,
The waypoints were reloaded from GPX files, not from a previous backup file. Does the crash log indicate anything?
Hi Rockbottom,
Please send me your GPX file,
Chris,
Attached are the files I had loaded at the time.
Hi Rockbottom,
It would appear these files are corrupted. I loaded them in my display and it immediately locked up. Where did these files come from? Can they be regenerated?
Chris,
How are they corrupt? They load just fine in my unit and show on my chart normally. Only sometimes when I open the list it has issues, not always . i have used these files in practically every other manufacturers units with no problems. Does Raymarine offer some type of conversion software? If not I dont know else I could regenerate them.