05-11-20, 11:48 AM
I'm setting up a multiple Raymarine electronics and need some help - my new to me boat came with a Raymarine Axiom 12 RV MFD and Quantum radar (wireless via bluetooth) so it didn't have a network.
I've gotten an additional Axiom 12 RV , Quantum 2 Doppler radar, RS150 GPS sensor and want to add a NMEA2000 VHF w/AIS (SH GX2400?) and a NMEA 2000 capable stereo as well, so I need to network all these.
I'm going to get a Raymarine HS5 ethernet hub but would like to know the best way to network these and the specific cables needed.
For the MFDs which model # Raynet cable would I run to the HS5 hub ?
And do I only run one MFD to the HS5 hub and the other to the SeatalkNg backbone ?
The Quantum 2 radar I'd prefer to run the Raynet wire rather than use the Wifi - do I run the Raynet wire to the HS5 hub or one of the Axiom MFDs ?
The RS-150 GPS antenna runs to the SeaTalkng backbone, I assume?
The RV-100 transducer goes to the master Axiom MFD ?
And the NMEA2000 stereo/VHF, assuming they are not Raymarine, go to the SeaTalk network via SeaTalkng to NMEA2000 adaptor cables ?
Thanks in advance for guidance, I would like to place an order asap for the correct cables.
I've gotten an additional Axiom 12 RV , Quantum 2 Doppler radar, RS150 GPS sensor and want to add a NMEA2000 VHF w/AIS (SH GX2400?) and a NMEA 2000 capable stereo as well, so I need to network all these.
I'm going to get a Raymarine HS5 ethernet hub but would like to know the best way to network these and the specific cables needed.
For the MFDs which model # Raynet cable would I run to the HS5 hub ?
And do I only run one MFD to the HS5 hub and the other to the SeatalkNg backbone ?
The Quantum 2 radar I'd prefer to run the Raynet wire rather than use the Wifi - do I run the Raynet wire to the HS5 hub or one of the Axiom MFDs ?
The RS-150 GPS antenna runs to the SeaTalkng backbone, I assume?
The RV-100 transducer goes to the master Axiom MFD ?
And the NMEA2000 stereo/VHF, assuming they are not Raymarine, go to the SeaTalk network via SeaTalkng to NMEA2000 adaptor cables ?
Thanks in advance for guidance, I would like to place an order asap for the correct cables.