05-15-20, 07:26 PM
The attached image shows in the top left the picture from a CAM220IP which is 10.5m above the water line. The bottom left shows a similar picture from an M232 about 0.5m higher.
The M232 picture (with its tighter field of view) shows a level horizon. (Slightly slanting because the boat was moving and stabilization was off).
The CAM220IP shows a much more curved horizon across its' FOV.
I cant find a setting to correct this curvature.
Please advise.
Thanks
John
The M232 picture (with its tighter field of view) shows a level horizon. (Slightly slanting because the boat was moving and stabilization was off).
The CAM220IP shows a much more curved horizon across its' FOV.
I cant find a setting to correct this curvature.
Please advise.
Thanks
John