05-23-20, 06:10 PM
I installed this and it is working but I only have 2 fuel tanks and tank 2 is showing no data. If I add tank 3 it has what is actually in tank 2. How do I correct this so I don't have to have 3 tanks on the display?
05-23-20, 06:10 PM
05-28-20, 09:35 PM
Hello ocgrant,
The MFD can only display data that is being sent to it from a particular sensor instance, let's say you can call it a channel. Often instances are setup logically as 1 ... 2 ... 3 and so on. In fact with programming, in just about every case, the first instance is 0. You will find that when you set the first tank as instance 0 in the sensor setup it will show correctly on the MFD.
Hope this helps
Happy boating and kind regards
Jules
The MFD can only display data that is being sent to it from a particular sensor instance, let's say you can call it a channel. Often instances are setup logically as 1 ... 2 ... 3 and so on. In fact with programming, in just about every case, the first instance is 0. You will find that when you set the first tank as instance 0 in the sensor setup it will show correctly on the MFD.
Hope this helps
Happy boating and kind regards
Jules