Raymarine forum

Good afternoon team,

Just wondering which MFD's pair well with the Axiom Pro 12rvx? i wish to compliment my current 12inch screen with a 9 or 7 inch screen. Can you pair the RVX with the lower level Axiom or do you have to pair them with a second RVX? I have the RV-100 and TM265 transducers connected to the 12.

Currently i have the 12 connected to seatalk backbone to network the external buzzer, i40 deep display and RS150 antenna.

Any feedback would be greatly appreciated.

Thanks
Ryan

Hello Ryan C2400,

The Axiom 12 Pro RVX will pair with any of the Axiom displays. This includes Axiom/Axiom Pro and Axiom XL.

Chris,

Any Axiom display would pair well. You would not need to get another sonar-enabled model, as the first unit will share all sonar data with a 2nd (or 3rd, 4th etc) via Raynet. Just make sure they are connected via Raynet (ethernet), as sonar and radar data is not carried over the NMEA200 network. For just 2 devices, you can connect them directly with a Raynet to Raynet cable. If you are going to add more Ethernet-connected devices (Radar, RMK10, cameras, more MFDs, etc) then you'll wind up with an HS5 switch in the mix as well.

@brk

Absolutely correct and well noted.

Happy boating and kind regards
Jules

Thank you for your replies. Greatly appreciate your feedback.

Your welcome,