05-26-20, 08:05 AM
I have an Axiom 9 MFD and a Camino AIS unit that is tied into the Seatalk NG network. The system worked fine until recently, when I upgraded to the most recent Lighthouse 3 software version and removed an external GPS antenna (which I thought was unused) from the system. The Axiom 9 now loses satellite fix. When I look at the satellite data page, the Axiom 9 is switching between the internal GPS receiver and the Camino AIS GPS antenna and losing signal in the process. I have the button selected for the Axiom to use its internal satellite receiver and that is the data source selected for GPS data. If I disconnect the Camino from the Seatalk NG system, the problem is resolved - the Axiom connects with up to 18 satellites and holds the fix. How can I get the Axiom to ignore the GPS data coming from the Camino AIS unit? Thanks.