Can an Axiom 9 interface with a Seatalk HS E55058 switch to read depth from a networked DSM300 with an Airmar transducer? If so, what connector/adapter is required?
Hello Mcaprio,
The Axiom displays are compatible with STHS data and the STHS switch (via
these adaptor cables), but the Axiom is not, I'm afraid, compatible with the DSM. The issue is the DSM's software, which is too old to support the updated sonar network protocol which the Axiom uses to handle more recent sonar technologies such as the Chirp CP470 and CP570 and RealVision3D.
On the other hand, you can connect the DSM's transducer to the Axiom directly, bypassing the DSM, via
adaptor cable A80489. The Axiom's output is 600W, and has much more advanced signal processing than the DSM. ALternatively you can replace the DSM with a [ur=https://www.raymarine.eu/fishfinders/cp370-digital-sonar/index.html]CP370[/url].
Regards,
Tom
Regards,
Tom