When I was last on the water, my unit started having display issues. I recently updated the software and am still experiencing the issue.
Has anyone had this similar issue?
How did you correct it?
Thanks,
Kevin
Welcome to the Raymarine Forum Kevin,
Should you have:
- updated the display with v12.09 Dragonfly software, and
- verified that the transom mounted Dragonfly transducer has not kicked up, and
- verified that the vessel be located within the water and should the depth of the water be at least 3' below the transducer, but not more than 600', and
- the sounder produces the plot shown within your photo,
then it is recommended that the Dragonfly display be sent to
Raymarine’s Product Repair Center to be bench tested/serviced.