06-23-16, 03:54 PM
I have a new to me 2005 vessel with a C120 display with up-to-date software. I can reset the Trip Log daily (if I remember to do so). How do you reset the (other) (main) Log?
06-23-16, 03:54 PM
06-23-16, 04:18 PM
Welcome to the Raymarine Forum Carey,
What device (instrument, DSM250/300/30, NMEA 0183 source, etc.) is supplying your system with speed through water data?
What device (instrument, DSM250/300/30, NMEA 0183 source, etc.) is supplying your system with speed through water data?
06-26-16, 01:35 PM
I have a DSM 250 sounder module with P65/P66 xducer.
06-27-16, 09:37 AM
Carey,
In systems where a DSM30/300/250 w/fishinder transducer featuring a speed through water sensing component has been interfaced to the system, the Log data item may be reset by resetting the DSM (MENU->FISHFINDER SETUP->DSM RESET ) from a Fishfinder application page. After resetting the DSM, it will be necessary to configure the Select Transducer setting to match the model of transducer which has been interfaced to the DSM.
In systems where a DSM30/300/250 w/fishinder transducer featuring a speed through water sensing component has been interfaced to the system, the Log data item may be reset by resetting the DSM (MENU->FISHFINDER SETUP->DSM RESET ) from a Fishfinder application page. After resetting the DSM, it will be necessary to configure the Select Transducer setting to match the model of transducer which has been interfaced to the DSM.