Raymarine forum

I changed out a c95 to a es127.. otherwise the system is the same. When following routes the autopilot is now asking to turn about 0.30 km prior to the waypoint. In the past it alarmed at 0.10 to 0.09...

Is there an offset that can be adjusted?

Same software version by the way, 17.45...

Equipment
es127
e125
P70R
Type 2 Autopilot
ST7001+

Welcome to the Raymarine Forum Trawlerboat,

As had been the case with your c95 MFD, the radius of the waypoint arrival circle is adjustable. When operating with the latest a/c/e/eS/gS-Series MFD software, the command sequence HOME->SET-UP->ALARMS->SAFETY ALARMS->WAYPOINT ARRIVAL->WAYPOINT ARRIVAL RADIUS.

Thank you for your reply... I will make that change immediately.

Regards
Barry

You're welcome.