08-25-16, 08:36 AM
08-25-16, 09:51 AM
Welcome to the Raymarine Forum Ken,
The CP470 and CP570 CHIRP Sounder Modules are compatible with any of the a/c/e/eS/gS-Series MFDs running the latest LightHouse software. As any combination of a/c/e/eS/gS-Series MFDs may be installed within an Ethernet Network, it would indeed be possible to interface an e165 MFD to a c95, c97, c125, or c127 MFD.
The CP470 and CP570 CHIRP Sounder Modules are compatible with any of the a/c/e/eS/gS-Series MFDs running the latest LightHouse software. As any combination of a/c/e/eS/gS-Series MFDs may be installed within an Ethernet Network, it would indeed be possible to interface an e165 MFD to a c95, c97, c125, or c127 MFD.
08-25-16, 12:56 PM
Thank you Chuck,
I'm picking some new electronics for a new lobster boat I'm having built. The boat will have two stations with full control of the vessel. I'm thinking of buying a new third generation c series 12.1 and a new e series 15.4. We use waypoints throughout the day to Mark our lobster gear and it's very important that the two screens share information. In other words if I mark a waypoint on the e series 15.4 will it show up on the c series 12.1 and will it show on the 15.4 if I used the 12.1 to Mark a waypoint.
Thanks for your help
I'm picking some new electronics for a new lobster boat I'm having built. The boat will have two stations with full control of the vessel. I'm thinking of buying a new third generation c series 12.1 and a new e series 15.4. We use waypoints throughout the day to Mark our lobster gear and it's very important that the two screens share information. In other words if I mark a waypoint on the e series 15.4 will it show up on the c series 12.1 and will it show on the 15.4 if I used the 12.1 to Mark a waypoint.
Thanks for your help
08-25-16, 02:19 PM
Ken,
Q: if I mark a waypoint on the e series 15.4 will it show up on the c series 12.1 and will it show on the 15.4 if I used the 12.1 to Mark a waypoint.
A: Yes, when these MFDs have be interfaced via an Ethernet Network, they will share all system data except for NTSC/PAL video (ex. deck/engine camera, etc.) with one another. The Chart application pages/panes may be individually configured to show or hide waypoints.
Q: if I mark a waypoint on the e series 15.4 will it show up on the c series 12.1 and will it show on the 15.4 if I used the 12.1 to Mark a waypoint.
A: Yes, when these MFDs have be interfaced via an Ethernet Network, they will share all system data except for NTSC/PAL video (ex. deck/engine camera, etc.) with one another. The Chart application pages/panes may be individually configured to show or hide waypoints.
08-25-16, 02:57 PM
Thanks,
08-25-16, 03:19 PM
You're welcome.
08-25-16, 06:20 PM
Another question if I may. As I mentioned I'm purchasing new electronics for a new boat. The one piece I purchased so far is the cp470. Bottom structure is as important if not more important than fish targets. Can you recommend a transducer that will give me a detailed picture of the bottom as well as fish targets. I'm currently using a c140w with a dsm300. Will I be as pleased with the quality and clarity of bottom structure with the cp470 as I am with the dsm300.
Again thank you
Again thank you
08-26-16, 08:54 AM
Ken,
The sonar imaging returned from a system featuring a CP470 or CP570 should equal or surpass that of that produced by the DSM300. As the greatest detail is associated with higher frequencies, a Medium/High (MH) or High (H) compatible CHIRP transducer would be recommended.
The sonar imaging returned from a system featuring a CP470 or CP570 should equal or surpass that of that produced by the DSM300. As the greatest detail is associated with higher frequencies, a Medium/High (MH) or High (H) compatible CHIRP transducer would be recommended.