09-12-16, 10:48 AM
can you tell me what if a standard cat6 network cable wired to T568A will work between the POE and the CAM220 ip the run to the camera is 80ft.
thanks
Dennis
thanks
Dennis
09-12-16, 10:48 AM
09-13-16, 12:17 PM
Welcome to the Raymarine Forum Goodwood Marine,
It is recommended that shielded marine grade CAT6 cable (tinned stranded) such as Raymarine's R32140 RJ45 to RJ45 Patch Cable (includes power leads) be used between a POE injector/port and any of the following:
- CAM210
- CAM220
- CAM200IP
- T200 Thermal Camera (all versions)
- FLIR MD Series Thermal Camera
- FLIR or Raymarine branded Thermal Camera JCU
The distance which you have specified is well within the maximum recommended distance between Ethernet/POE terminals.
It is recommended that shielded marine grade CAT6 cable (tinned stranded) such as Raymarine's R32140 RJ45 to RJ45 Patch Cable (includes power leads) be used between a POE injector/port and any of the following:
- CAM210
- CAM220
- CAM200IP
- T200 Thermal Camera (all versions)
- FLIR MD Series Thermal Camera
- FLIR or Raymarine branded Thermal Camera JCU
The distance which you have specified is well within the maximum recommended distance between Ethernet/POE terminals.