Raymarine forum

Raymarine forum > Raymarine Forums > Multifunction Displays > SmartPilot X10 NMEA output
Full Version: SmartPilot X10 NMEA output
You're currently viewing a stripped down version of our content. View the full version with proper formatting.

Eric.Ramsey.Sr

10-01-16, 04:27 PM
Does the X10 output speed/wind/depth data on the NMEA 0183 interface?
Speed/wind/depth are connected via ST. STng is not being used.
I am trying to interface to a Garmin 4210 via 0183.
Regards,
Eric

Chuck - Raymarine - Moderator

10-03-16, 10:21 AM
Welcome to the Raymarine Forum Eric,

The SPX Series Autopilots are not designed to function as SeaTalkng / NMEA 2000 to NMEA 0183 data bridging devices with respect to outputting the referenced data items. When seeking to bridge data to/from a SeaTalkng / NMEA 2000 backbone to NMEA 0183, it is recommended that a compatible MFD featuring a NMEA 0183 interfaced or a SeaTalkng / NMEA 2000 data bridge (ex. Actisense NGW-1-STNG, etc.) be used.
Raymarine forum > Raymarine Forums > Multifunction Displays > SmartPilot X10 NMEA output
Reference URL's