02-03-17, 07:19 AM
02-03-17, 11:26 AM
Welcome to the Raymarine Forum Gamefish,
Is it not possible to connect both the new CPT-S thru-hull and CPT-100 directly to an eS98 MFD. Should both of these transducers be desired to be used within the system, then it would be recommended that a CP100 CHIRP/DownVision Sounder Module be interfaced to the system, and that the CPT-S transducer then be mated to the CP100. The MFD may then be configured to display DownVision sonar imagery via it's own internal CHIRP/DownVision fishfinder circuitry and that it display CHIRP (conical) sonar from the CP100.
Is it not possible to connect both the new CPT-S thru-hull and CPT-100 directly to an eS98 MFD. Should both of these transducers be desired to be used within the system, then it would be recommended that a CP100 CHIRP/DownVision Sounder Module be interfaced to the system, and that the CPT-S transducer then be mated to the CP100. The MFD may then be configured to display DownVision sonar imagery via it's own internal CHIRP/DownVision fishfinder circuitry and that it display CHIRP (conical) sonar from the CP100.