Dragon5 pro constant GPS lose position
First time out w/ 5 pro observations
?1.constant irritating alarm GPS lose position.
?2.knts wasn’t displayed. from down vision, was displayed. From sonar tempuarely
?3.upon initial turn on I have accept terms, can this be bypassed?
Welcome to the Raymarine Forum Steve,
Please verify that the Dragonfly display has been installed in a location affording it an unobstructed view of the skies and that the vessel is likewise not located under a structure which may impair its ability to receive GPS data. Should these criteria have been satisfied and the Dragonfly display fail to maintain or acquire a GPS position FIX, then it would unfortunately appear that the Dragonfly display has suffered a failure of its internal GPS receiver, necessitating that it be sent to
Raymarine’s Product Repair Center to be bench checked / serviced or replaced by the Raymarine dealer (if purchased within the last 30 days).
The speed data reported by a Dragonfly display is Speed Over Ground (SOG), the source of which is the display's internal GPS receiver. Should the Dragonfly display's GPS receiver fail to acquire/maintain a GPS position FIX, then it cannot then calculate SOG.
Unfortunately, no option is provided to bypass acknowledgment of the Limitations of Use dialog. It is a legal necessity in these times.
hello Chuck I have a pilot house type boat w/ alumin hardtop.
pro5 is located 5" from star/window 10" from windshield.
my andriod 6 tablets located farrer away from window,it's builtin GPS tracks my position (it actualley tracks my position from inside my house).
Steve,
Please click
here to view a FAQ addressing this subject. Should you believe that your Dragonfly display's internal GPS sensor has suffered a failure, then it would be recommended that the display be temporarily moved to a location affording it an unobstructed view of the skies overhead and tested in that location. Should it fail to acquire and maintain a GPS position FIX when so tested, then it would be recommended that the
Raymarine’s Product Repair Center to be bench checked / serviced.