06-12-17, 09:48 PM
When trying to import a .gpx file of waypoints created with Voyage Planner, I get the message 'card in use' import unsuccessful. I have tried the original file downloaded from Outdoor Alabama and the file created in Voyage Planner from the .csv file. I have attempted this on 3 machines. e97, e127 and eS series MFD. They all give the same error. I have updated the e97 and e127 to the latest lighthouse version.
I purchased Voyage Planner after attempting to use the original file as well as one created using GPSBabel.
Somewhere on here or the old tech forum, I read where sometimes the file has to be changed using Excel or something to make the Raymarine unit accept it. I have been unsuccessful at locating that thread again.
The .gpx file will not upload because it is too large. However, I do believe it meets all the requirements like file name length and <3000 WPs.
Thank you for any assistance you can give me.
Bernie
I purchased Voyage Planner after attempting to use the original file as well as one created using GPSBabel.
Somewhere on here or the old tech forum, I read where sometimes the file has to be changed using Excel or something to make the Raymarine unit accept it. I have been unsuccessful at locating that thread again.
The .gpx file will not upload because it is too large. However, I do believe it meets all the requirements like file name length and <3000 WPs.
Thank you for any assistance you can give me.
Bernie