08-03-17, 11:56 AM
08-03-17, 02:31 PM
Welcome to the Raymarine Forum SeaDog,
It's not quite clear what you are asking instructions for. Should you have started a "track" (the breadcrumb trail indicating the path traveled by the vessel), then the track may be stopped via the command sequence MENU->MY DATA->TRACKS->STOP TRACK for a/c/e/eS/gS-Series MFDs operating with LightHouse II software.
It's not quite clear what you are asking instructions for. Should you have started a "track" (the breadcrumb trail indicating the path traveled by the vessel), then the track may be stopped via the command sequence MENU->MY DATA->TRACKS->STOP TRACK for a/c/e/eS/gS-Series MFDs operating with LightHouse II software.
08-03-17, 03:49 PM
ALLOW ME TO BE A LITTLE MORE CLEAR.
A HEAVY RED TRACKING LINE IS CREATED FOR EACH TRIP, AND IT IS ADDITIVE IN THE SENSE THAT THE TRACKING LINES ARE OVER LAPPING AND REMOVING CLARITY TO A SMALL SCENARIO LIKE A HARBOR ENTRANCE.
I HAVE TRIED YOUR RECOMMENDED REMEDY, AND THAT DID NOT RESOLVE THE ISSUE.
QUITE SIMPLY, I WANT TO TOTALLY REMOVE THE TRACKING FEATURE FROM MY E127.
ANY SUGGESTIONS/IDEAS ?
MANY THANKS,
A HEAVY RED TRACKING LINE IS CREATED FOR EACH TRIP, AND IT IS ADDITIVE IN THE SENSE THAT THE TRACKING LINES ARE OVER LAPPING AND REMOVING CLARITY TO A SMALL SCENARIO LIKE A HARBOR ENTRANCE.
I HAVE TRIED YOUR RECOMMENDED REMEDY, AND THAT DID NOT RESOLVE THE ISSUE.
QUITE SIMPLY, I WANT TO TOTALLY REMOVE THE TRACKING FEATURE FROM MY E127.
ANY SUGGESTIONS/IDEAS ?
MANY THANKS,
08-04-17, 07:42 AM
SEA DOG,
I believe that the feature which you have described is the SonarChart Live feature, not the Tracks feature. Please click here to view a FAQ addressing this subject. As indicated within the referenced FAQ, the SonarChart Live feature is configured ON/OFF via the command sequence MENU->PRESENTATION->ADVANCED OPTIONS->SONARCHART LIVE from within the Chart application page/pane being viewed.
I believe that the feature which you have described is the SonarChart Live feature, not the Tracks feature. Please click here to view a FAQ addressing this subject. As indicated within the referenced FAQ, the SonarChart Live feature is configured ON/OFF via the command sequence MENU->PRESENTATION->ADVANCED OPTIONS->SONARCHART LIVE from within the Chart application page/pane being viewed.
08-04-17, 02:56 PM
ALAS, SUCCESS !!
THANK YOU VERY MUCH FOR YOUR INPUT AND PATIENCE.
VERY MUCH APPRECIATED ..........
THANK YOU VERY MUCH FOR YOUR INPUT AND PATIENCE.
VERY MUCH APPRECIATED ..........
08-04-17, 03:47 PM
You're welcome