Raymarine forum

Raymarine forum > Raymarine Forums > Product and Feature Suggestions > anchor chain counter
Full Version: anchor chain counter
You're currently viewing a stripped down version of our content. View the full version with proper formatting.

LeslieTroyer

09-01-17, 12:51 PM
do either i70 or e7D understand any PGN's relating to anchor chain counters - if so what models of chain counters are compatible ?? SeatalkNG or 0183

I would like to read how much rode is deployed while anchoring. I can operate the windlass from the cockpit but its too far to read the markings on the chain or line.

Thanks
Les

Chuck - Raymarine - Moderator

09-14-17, 10:50 AM
Welcome to the Raymarine Forum Les,

Raymarine's a/c/e/eS/gS-Series MFDs support LightHouse II software and Raymarine's Axiom MFD's support LightHouse 3 software. Depending upon testing results, LightHouse 3 software may be able to be installed on eS/gS-Series MFDs.
Unfortunately, neither Raymarine's MFDs running LightHouse 3 software nor Raymarine's MFDs running LightHouse II software support displaying the amount of anchor rhode which as been deployed by a windlass. A feature request will be logged to consider including support for displaying anchor rode from a NMEA 2000 data source within a future LightHouse 3 software update. No LigthHouse II software updates are currently expected to follow the v19.03 software update.

Please click here more information concerning product and feature suggestions.
Raymarine forum > Raymarine Forums > Product and Feature Suggestions > anchor chain counter
Reference URL's