Raymarine forum

Full Version: c70 replacement
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
my C70 screen fades out, or doesn't always come on, but sometimes works perfectly, so from reading other forums I take it that that unit is failing. everything else works great, radar , gps, depth. can I replace it with a c80, c120 etc. by just pluging it in as the back of those units looks the same? I understand the e series would require additional equiptment??
Welcome to the Raymarine Forum Tom,

The communications interface of each of the C-Series Classic MFDs (C70, C80, C120) is identical, permitting the cables to be simply unplugged from the currently installed C-Series Classic MFD and then plugged into the corresponding interface of the C-Series MFD with which it will be replaced.
(10-11-17 12:02 PM)Chuck - Raymarine - Moderator Wrote: [ -> ]Welcome to the Raymarine Forum Tom,

The communications interface of each of the C-Series Classic MFDs (C70, C80, C120) is identical, permitting the cables to be simply unplugged from the currently installed C-Series Classic MFD and then plugged into the corresponding interface of the C-Series MFD with which it will be replaced.

Thanks! going to the Annapolis boat show this weekend and will see what they can do for me.
You're welcome.
Reference URL's