Raymarine forum

Hi All,

I have a Botnia Targa 27.1 and have the twin 3D bronze with 20 degrees compensation as my hull is 19 degrees at midships. I have read the fitting instructions and it states to fit them parallel as close as possible to the hull centreline. They will be about 12 inches roughly apart or do I fit them closer as I could probably get them 6 inches apart obviously parallel ?

Kk

Hi SIESTA BOTNIA
Thank you for your enquiry,

mounting the transducers 12" will be fine, in practice up to 36" apart is OK, just make sure they are parallel and equi-spaced from the keel.

Regards