02-04-18, 02:40 PM
I have been in discussion with your Tech support and this forum about a full upgrade (radar, MFD, i60, i70s, EV-1 autohelm, AIS, etc from RL70C and ST60 vintage) but have a more immediate issue to address vs cost of total upgrade. My ST5000+ LCD is fading, thus the need to replace it, the autopilot control is good - see attached pics for this and back of the control head for wiring and questions.
I have read the two FAQs on using the p70s control head in place of the ST5000+ control head but still am having trouble visualizing the actual wiring using the D244 junction box, the A22164 adapter cable and p70s control head.
I have looked on your website but can not find a diagram for the connections on the back of he D244 and the p70s. I do not understand where all the connections on the back of the ST5000+ control head (fluxgate compass, drive, clutch, rudder, ?)are going between the D244, the p70s and then to the RL70C via Seatalk1.
Will you please provide schematic diagram. I currently have 3 other ST60s (boat speed, wind, depth) daisy chained to the ST5000+.
Thanks for your help.
Bill
I have read the two FAQs on using the p70s control head in place of the ST5000+ control head but still am having trouble visualizing the actual wiring using the D244 junction box, the A22164 adapter cable and p70s control head.
I have looked on your website but can not find a diagram for the connections on the back of he D244 and the p70s. I do not understand where all the connections on the back of the ST5000+ control head (fluxgate compass, drive, clutch, rudder, ?)are going between the D244, the p70s and then to the RL70C via Seatalk1.
Will you please provide schematic diagram. I currently have 3 other ST60s (boat speed, wind, depth) daisy chained to the ST5000+.
Thanks for your help.
Bill