Raymarine forum

My displays each came with 4 self-threading screws that I assumed were for mounting the display, since there were no other fasteners in the package. These screws are too small to engage in the holes in the back of the displays. What should I use? Did I miss something?

Thanks.

Mark

Welcome to the Raymarine Forum Mark,

Please see the diagram below from the i70S Installation and Operations Guide. As you can see from this diagram, the screws are not intended to be driven from the front side of the i70s, through the i70S, and then into the mounting surface ... not the other way around.

Thanks, Chuck.

Mark

You're welcome.