05-30-18, 04:39 PM
Is the 400 or 400G autopilot computer with the ST600R control unit designed to work with Lighthouse 3? I have the converter installed and passing data but am not able to enable auto pilot slider in the MFD display settings. The MFD's are es127 and Axiom 7.
Also, I see heading coming from the autopilot and displaying on the MFD's, but there is a 10 degree offset (autopilot control shows 120 deg and the MFD shows 110 deg). What would be the cause of this?
Thank you,
Steve.
Also, I see heading coming from the autopilot and displaying on the MFD's, but there is a 10 degree offset (autopilot control shows 120 deg and the MFD shows 110 deg). What would be the cause of this?
Thank you,
Steve.