I have an i50 tridata that is replacing an st60 tridata. I have used the seatalk ng to seatalk connector cable to connect it to the remaining st60 and it appears to work OK. There is a remaining seatalk ng connector on the i50 which is not in use. Does that need the supplied terminator, or is OK just left unused? Thanks.
That Seatalk NG port is if you connected via Seatalk NG interface to daisy chain with a spur cable (up to two). You are using the Seatalk 1 communication. The connector should be left unused.
(04-11-16 03:12 PM)Steve - Raymarine - Moderator Wrote: [ -> ]That Seatalk NG port is if you connected via Seatalk NG interface to daisy chain with a spur cable (up to two). You are using the Seatalk 1 communication. The connector should be left unused.
That's great, thanks for the quick response. John
Anytime, contact us with any future questions.