06-07-18, 10:17 AM
06-07-18, 10:25 AM
Welcome back to the Raymarine Forum Eirinnrose,
Please click here to view a FAQ addressing this subject.
Please click here to view a FAQ addressing this subject.
06-07-18, 02:28 PM
Thanks for the information, Can you run two C120 MFD's using radar on one and a chart on the other, or split the screen on with with a fish finder?
06-08-18, 09:10 AM
Eirinnrose,
Q1. Can you run two C120 MFD's using radar on one and a chart on the other?
A1. Yes. That said, radar imaging will only be available on the C-Series Classic MFD which has the radar transducer's cable directly connected to the MFD's RADAR socket. Similarly, Navionics cartography may only be viewed on the C-Series Classic MFD which have the Navionics chart card within its reader.
Q2. or split the screen on with with a fish finder?
A2. Yes. Fishfinder imaging will only be visible on the C-Series Classic MFD which has the DSM's cable directly connected to its DSM socket.
Q1. Can you run two C120 MFD's using radar on one and a chart on the other?
A1. Yes. That said, radar imaging will only be available on the C-Series Classic MFD which has the radar transducer's cable directly connected to the MFD's RADAR socket. Similarly, Navionics cartography may only be viewed on the C-Series Classic MFD which have the Navionics chart card within its reader.
Q2. or split the screen on with with a fish finder?
A2. Yes. Fishfinder imaging will only be visible on the C-Series Classic MFD which has the DSM's cable directly connected to its DSM socket.
06-08-18, 09:26 AM
Thanks Chuck, much appreciated.
06-08-18, 09:38 AM
You're welcome.