06-07-18, 02:28 PM
Just installed the new Volvo Penta "Easy Connect" engine NMEA 2000 interface to the Seatalk NG network and ES127 MFD.
According to the device itself, I have EVC connection to the NMEA 2000 bus. Signals are present on the bus as all the Volvo Penta instruments / gauges work perfectly for both engines, and these are connected to the same EVC bus.
But my ES127 with Lighthouse 3.4.66 only shows data from Port Engine.
What is also strange is that if I try to configure the engines in the settings menu of the MFD, I get error messages saying that no engine data is received for any of my two engines (Volvo Penta D4-300 with EVC-C)
Is there a known issue with this feature and Lighthouse 3.4.66?
According to the device itself, I have EVC connection to the NMEA 2000 bus. Signals are present on the bus as all the Volvo Penta instruments / gauges work perfectly for both engines, and these are connected to the same EVC bus.
But my ES127 with Lighthouse 3.4.66 only shows data from Port Engine.
What is also strange is that if I try to configure the engines in the settings menu of the MFD, I get error messages saying that no engine data is received for any of my two engines (Volvo Penta D4-300 with EVC-C)
Is there a known issue with this feature and Lighthouse 3.4.66?