Raymarine forum

Raymarine forum > Raymarine Forums > Networking / System Integration > [CA11] Is System Diagram Correct - no power to i 70 and p 70
Full Version: [CA11] Is System Diagram Correct - no power to i 70 and p 70
You're currently viewing a stripped down version of our content. View the full version with proper formatting.

judyfusco

06-13-18, 01:35 PM
We installed an autopilot, an axiom 7 MFD and wind/depth instruments using the attached system diagram. When we powered it up, the computer had power as did the MFD. However, the i 70 and p70 instruments would not turn on. Is there something incorrect in the system diagram or should I double check all connections?

Chuck - Raymarine - Moderator

06-13-18, 02:07 PM
Welcome to the Raymarine Forum Judy,

I can find no fault with your diagram. However, it appears that your SeaTalkng backbone is not receiving power. I would recommend starting with the SeaTalkng Power Cable.
Raymarine forum > Raymarine Forums > Networking / System Integration > [CA11] Is System Diagram Correct - no power to i 70 and p 70
Reference URL's