06-29-18, 08:00 PM
I have i70s instrument, using the itc-5 converter for my i60 wind transducer.
My power reading without the red plugged in at the ITC-5 is 8.0 v , when I plug the red wire in to power the transducer it drops to 4.85 v. This has to be an issue. I tested the depth,temp, and speed with a constant 8.0v plugged in or not.
The wire readings are as follows.
Blue 1.80
Green 2.04
Yellow .04 to 3.8
The wind transducer wire is uncut from the mast. Is the lower power reading at the red from an issue with the wind transducer.
My power reading without the red plugged in at the ITC-5 is 8.0 v , when I plug the red wire in to power the transducer it drops to 4.85 v. This has to be an issue. I tested the depth,temp, and speed with a constant 8.0v plugged in or not.
The wire readings are as follows.
Blue 1.80
Green 2.04
Yellow .04 to 3.8
The wind transducer wire is uncut from the mast. Is the lower power reading at the red from an issue with the wind transducer.