I have a NMEA 2000 depth transducer on the network, NOT a Raymarine Sonar Module, and an Axiom 9 PRO. The Axiom reads the data but I can't seem to calibrate/configure it. How can I go about accessing and setting the transducer offset with the Axiom/Lighthouse?
Thanks,
Ryan
Welcome to the Raymarine Forum rroberts76,
Please click
here to view a FAQ addressing this subject. As indicated therein, Raymarine's MFD running LightHouse II or LightHouse 3 software, i50 Instruments, i60 Instruments, and i70 MFIDs are not designed to calibrate, apply offsets in conjunction with, or configure alarms in conjunction with third party NMEA 2000 sensors.