07-02-18, 02:47 PM
Hi -
I'm very close to purchasing an Axiom 9RV, but I think that I have run into a couple of minor roadblocks and have several questions:
1 - It appears that non-Pro Axioms do not natively support NMEA0183, and I have an older Raymarine VHF DSC fixed-mount transceiver (215) that needs NMEA0183. Am I correct that the following kit will supply NMEA0183 to the 215 from the 9RV:
http://forum.raymarine.com/showthread.php?tid=2
2 - Can I then use one of the NMEA2000 (white) ports on the converter to establish connectivity to another NMEA2000 device, namely a Fusion MS-IP700i by using a SeaTalkNG to NMEA2000 cable?
3 - I'm I correct in assuming that the NMEA2000 connector on the 9RV's power connector does not supply bias (power) to the NMEA2000 bus?
Thanks in advance for your help,
Mike
I'm very close to purchasing an Axiom 9RV, but I think that I have run into a couple of minor roadblocks and have several questions:
1 - It appears that non-Pro Axioms do not natively support NMEA0183, and I have an older Raymarine VHF DSC fixed-mount transceiver (215) that needs NMEA0183. Am I correct that the following kit will supply NMEA0183 to the 215 from the 9RV:
http://forum.raymarine.com/showthread.php?tid=2
2 - Can I then use one of the NMEA2000 (white) ports on the converter to establish connectivity to another NMEA2000 device, namely a Fusion MS-IP700i by using a SeaTalkNG to NMEA2000 cable?
3 - I'm I correct in assuming that the NMEA2000 connector on the 9RV's power connector does not supply bias (power) to the NMEA2000 bus?
Thanks in advance for your help,
Mike