07-17-18, 02:23 PM
I have an e95, AIS650, i70, i50, and i60. I had purchased an iTC-5 to link my earlier speed through water / temperature sensor to the network. I checked the speed/temp with the older display just prior to the switch to the iTC-5. But, after conversion the speed through the water and temperature data is not shown by the i70.
The i70 sees that the iTC-5 is on the network. I have it connected via the blue ended cable. I have the other blue socket filled with the blue termination plug.
Some people have suggested that the iTC-5 is not universally compatible with all older Raymarine sensors - not sure which mine is ST50 or ST60. Any suggestions for diagnosing this?
Tom, Catalina 380
The i70 sees that the iTC-5 is on the network. I have it connected via the blue ended cable. I have the other blue socket filled with the blue termination plug.
Some people have suggested that the iTC-5 is not universally compatible with all older Raymarine sensors - not sure which mine is ST50 or ST60. Any suggestions for diagnosing this?
Tom, Catalina 380