04-22-16, 09:18 AM
I am connecting my digital radar dome to my new C95 MDF. My previous MDF was a E80 with a RJ45 connection. What cable do I need to connect the radar to the C95?
Thanks,
Phil..
Thanks,
Phil..
04-22-16, 09:18 AM
04-22-16, 10:27 AM
Welcome to the Raymarine Forum saustop,
If the radome had been properly interfaced to the E80 MFD's SeaTalkhs socket, the Digital Radar Cable w/RJ45 plug would have been interfaced to a SeaTalkhs Crossover Coupler or SeaTalkhs Network Switch, which in turn would have been interface to the MFD's SeaTalkhs socket via an appropriate length of SeaTalkhs (M) to RJ45 (M) Cable. When replacing an E-Series Classic MFD with an a/c/e/eS/gS-Series MFD, this SeaTalkhs Cable may be adapted with an A80160 SeaTalkhs (F) to RayNet (F) Adapter to mate to the Network (Ethernet) socket of an a/c/e/eS/gS-Series MFD.
If the radome had been properly interfaced to the E80 MFD's SeaTalkhs socket, the Digital Radar Cable w/RJ45 plug would have been interfaced to a SeaTalkhs Crossover Coupler or SeaTalkhs Network Switch, which in turn would have been interface to the MFD's SeaTalkhs socket via an appropriate length of SeaTalkhs (M) to RJ45 (M) Cable. When replacing an E-Series Classic MFD with an a/c/e/eS/gS-Series MFD, this SeaTalkhs Cable may be adapted with an A80160 SeaTalkhs (F) to RayNet (F) Adapter to mate to the Network (Ethernet) socket of an a/c/e/eS/gS-Series MFD.