08-31-18, 01:13 PM
I have recently installed a Axiom Pro MFD (with latest software) connected to a 424 digital radar dome. Most of the time when turning on the Radar scanner the Axiom recognizes and connects to the radar. On occasion it fails to connect with a message that states radar not found. If I pull the power fuse for the scanner and immediately put it back in the the radar is found and powers up.
I have checked all wiring (connectors,fuse panel,etc.) and find no issues. I have also confirmed that there is 12.8 volts or more at the fuse .
Once on the Radar works perfectly and does not shut down.
Please advise .
I have checked all wiring (connectors,fuse panel,etc.) and find no issues. I have also confirmed that there is 12.8 volts or more at the fuse .
Once on the Radar works perfectly and does not shut down.
Please advise .