09-04-18, 06:49 AM
I upgraded from 2001 era system consisting of a RL80C RN300/RS125 GPS system. Replaced with an a128 MFD and left in place a ST60 tridata and ST7000+ autopilot system by installing a seatalk to seatalkng converter. Additionally, I have a DSM300 networked in via Raynet.
Everything working well except the DSM300 give erroneous dept readings. When I first turn on I read 9.9 ft but on in 48 ft of water. See picture.
I am trying to update the firmware for the st/stng converter and the DSM300. I see I need version 4.20. Does this cover both the converter and the DSM300?
However I see I need bootloader v5.16. Is this included in the update or is it a separate file.
Please advise best practice to upgrade these products. Any other upgrades required /recommended?
Everything working well except the DSM300 give erroneous dept readings. When I first turn on I read 9.9 ft but on in 48 ft of water. See picture.
I am trying to update the firmware for the st/stng converter and the DSM300. I see I need version 4.20. Does this cover both the converter and the DSM300?
However I see I need bootloader v5.16. Is this included in the update or is it a separate file.
Please advise best practice to upgrade these products. Any other upgrades required /recommended?