Raymarine forum

Hi,

I'm going to be hooking up my Axiom 12 on the bow to my Minnkota Ulterra with the US2 built into the Minnkota. After reviewing the FAQ and finding the "Axiom Sonar Options" PDF, I want to verify what I *think* I know. Can you please confirm or correct?

If I want to use the US2 built-in transducer with temp, I would need:
- Embedded 600W to Minnkota adapter (A62363)
- RV to Embedded transducer adapter (A80488)

If I want to install a Raymarine transducer on the Minnkota motor head, I would need:
- CPT-100DVS transducer (A80351)
- CPT-100DVS trolling motor mount (A80330)
- RV to CPT adapter (A80490)
- clamps to secure the trolling motor mount and transducer to the motor head

Thank you in advance for your help so I order the correct parts!

Scott

Hi Scott,

Thank you for reaching out on the forum.

Both options, and their corresponding part numbers, are correct if using an AXIOM 12 RV display.

- Dave

Yes, this is for a Axiom 12 RV display. Thank you for the quick response and info - I'm off to order parts!

Scott

You're welcome.