Raymarine forum

Full Version: ES98 and CP120 Transducer - the lightwave nightmare continues
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Hi all,

I have manged to successfully roll back Lightwave from 3 to 2 due to lack of support for my autopilot.

In doing so, I have got pretty well most things back the way they were except for the transducer which now has disappeared!

This was a brand new Downvision version bought at same time as ES98. I suspect (and fear!) that the updates has not rolled back for this device so it is ignoring it.

Anybody have the first idea how I might solve this?

HELP!!!!

Thanks in advance
Hello James,

There is no software in the CPT120 transducer, you don't need to worry on that point. The transducer is auto-detected purely on the basis of a sense resistor signal line in the transducer cable, so I am guessing that either your transducer resistance is borderline or through the upgrade-downgrade process, the auto-detection hasn't worked this time. I'd do a power-on reset on the eS98 first of all, if you haven't already. In order to do so, press and hold the Back key as you power up. I assume you don't have any user data in there at the moment, but if so, make sure you back up all your waypoints/routes/tracks etc. before you do so.

If the reset doesn't solve it, come back to me.

Regards,
Tom
Thanks Tom

I performed a full factory reset and it came back to life (thankfully!)

Regards

James
You're welcome.
Reference URL's