Raymarine forum

Full Version: [CA11] Raymarine st1000 push rod problem ?
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Hallo,ich besitze ein Raymariene ST 1000+ diesen habe ich in einer Notlage bei achterlichen Winden kurz in Betrieb genommen dabei wurde die Schubstange gestaut und bewegt sich nicht mehr.Im Hafen habe ich den Autopilot aufgemacht und festgestellt das bei einen Antriebsrad die Zähne abgeschoren sind.Meine Frage:kann ich diese Antriebsrad bei Raymariene bestellen oder mus ich den Autopilot einschicken?

Hi, I own a Raymariene ST 1000+ I have in an emergency in aft winches briefly put into operation while the push rod was jammed and no longer moves. In the harbor I opened the autopilot and found that the teeth are shorn at a drive wheel .My question: can I order this drive wheel at Raymariene or do I have to send in the autopilot?
Welcome to the Raymarine Forum Segler,

It is generally recommended that repairs to Raymarine drive units be performed by one of Raymarine’s Product Repair Centers. However, should you attempt to perform the repair yourself, the Q054 Gear Kit may be purchased/ordered from an authorized Raymarine dealer.

Willkommen beim Raymarine Forum Segler,

Es wird generell empfohlen, dass die Reparatur von Raymarine-Antriebsgeräten von einem der [http://www.raymarine.com/display/?id=779] Produktreparaturzentren [/ url] durchgeführt wird. Sollten Sie jedoch versuchen, die Reparatur selbst durchzuführen, kann das Q054 Gear Kit bei einem autorisierten Raymarine-Händler gekauft / bestellt werden.
Danke für die schnelle Antwort Segler

Thanks for the quick response sailor
You're welcome.
Reference URL's